Unit Dies for Press Machines
Unit Dies for the UNIT WORKER
Punching and cutting can be executed on various kinds of shaped steel bars, such as C-purlins, angle bars, C channels or flat bars. A wide coverage of steel bars helps to minimize the required space in your factory.
＊A dedicated device (option) is required for flat bars.
A diverse lineup of cutting and punching dies can meet your needs for metalworking applications appropriate to the size and thickness. Two types of cutting dies are available: Single-cut dies for thin steel bars and double-cut dies for thick steel bars. Angle bars up to t12 mm can be handled.
The four punch type offers the selection of punching dies (four punching dies, UWF-150IIIW) for punching holes in two sizes each on the right and left sides. Two-size punching can be executed in a single pass, which eliminates the trouble of die change.
| Punch (mm) | φ5×3t to φ25×12t | |
|---|---|---|
| Cutting (single-cut) (mm) | Angle bars | L30×30×3 to L100×100×7 |
| Flat bars | 32×3t to 100×9 | |
| C channels | [75×40×5×7 to [125×65×6×8 | |
| C-purlins | C60×30×10×2.3 (1.6) to C150×75×25×4.5 ~ 3.2 | |
| Cutting (double-cut) (mm) | Angle bars | L40×40×3〜L150×150×12 |
| Flat bars | 32×3〜150×12 | |
| Automatic operation possible steel bar length (m) | 12.1〜0.55 | |