Unit Dies for Press Machines
Unit Dies for the UNIT WORKER
Three drills can operate along two or three axes for simultaneous drilling as programmed and can finish drilling in the shortest possible time. Marking with a center drill is also available if necessary.
The ATC unit holding four kinds of tools executes a tool change automatically during machining operation. The machine's downtime for manual tool change can be reduced.
In addition to a carbide tipped saw blade, a HSS (high-speed steel) saw blade that is suitable for cutting thin steel bars, such as square hollow sections or C-purlins, can be installed for clean cutting with low noise. Also the blade can be changed with ease in a short time.
Workpiece length (mm) | 4500 to 12500 | |
---|---|---|
Cutting (mm) | Square hollow sections | 50 sq. to 150 sq. |
Angle bars | L50×50 to L150×150 | |
C channels | [75×40 to [300×90 | |
H/I beams | H100×50 to H300×150 | |
C-purlins | C75×40×15 to C250×75×25 | |
Drilling diameter (mm) | φ9 to φ28 |
Workpiece length (mm) | 2500 to 12500 | |
---|---|---|
Cutting (mm) | Square hollow sections | 50 sq. to 150 sq. |
Angle bars | L50×50 to L150×150 | |
C channels | [75×40 to [300×90 | |
H/I beams | H100×50 to H300×150 | |
C-purlins | C75×40×15 to C250×75×25 | |
Drilling diameter (mm) | φ9 to φ32 |