Unit Dies for Press Machines
Unit Dies for the UNIT WORKER
Cutting can be executed on various kinds of shaped steel bars, such as H/I beams, angle bars, C channels and square hollow sections.
Two square or round hollow sections can be bundled when cutting. Workpiece setup can be done simply by aligning their front ends or tail ends. In addition, they can be loaded automatically using an autoloader.
In addition to a carbide tipped saw blade, a HSS (high-speed steel) saw blade suitable for cutting thin steels, such as square hollow sections, round hollow sections and C-purlins, can be installed to achieve clean cutting with less noise. Also, the blade can be changed quickly with ease.
Round hollow sections (mm) | 1-piece cut | φ35 to φ139.8 |
---|---|---|
2-piece cut | φ35 to φ114.3 | |
Square hollow sections (mm) | 1-piece cut | □40 to □150 |
2-piece cut | □40 to □125 | |
Workpiece length (mm) | Maximum | 12,000 |
Minimum | 510 + product length | |
Cutting length (mm) | Trim cut | 15 or more |
Remnant | 70 or more | |
Product | 15 or more |