Unit Dies for Press Machines
Unit Dies for the UNIT WORKER
By gripping the tail end, the workpiece can be fed at the maximum feed rate of 50 m/min. The automatic hydraulic gripper grips the tail end of the workpiece and feeds the workpiece at a high speed. The mechanism to accommodate workpiece distortion is also provided.
Three drills on three axes work to complete drilling in the shortest possible time. Since all drill axes can automatically be decelerated by pressure switches, there is no need to make limit adjustment. Simply input drill diameters.
The CNC system helps to automatically create programs simply by tapping on-screen buttons in response to inquiries from the computer for fully automatic operation. Operator friendly graphics (pictograms and charts) are helpful.
Drilling diameter (mm) | Upper axis: φ14 to φ40 Right/left axis: φ14 to φ32 |
---|---|
Thickness (mm) | 5 to 55 |
H/I beams (mm) | 150×75 to 1,000×500 |
---|---|
Square hollow sections (mm) | □150×□500 |
C channels (mm) | [150×75 to [380×100 |
Angle bars (mm) | L150×150 to L250×250 |