Unit Dies for Press Machines
Unit Dies for the UNIT WORKER
Setup can be made simply by aligning the positioning pin on the unit die (preset die) with the pin hole on the table and tightening the fixing bolt.
A 2.2-kW rotor pump is employed to ensure a low-noise working environment.
Various unit dies having an open height up to 400 mm can be mounted by changing the punch head. Use of an optional bolster with a round hole enables setup of general die sets.
| Pressing capacity (kN [tf]) | 300[30] | |
|---|---|---|
| Stroke (mm) | Maximum | 100 |
| Open height (mm) | 400 (with the punch head removed) / 330 | |
| Shut height (mm) | 300 (with the punch head removed) / 230 | |
| Table height (mm) | 870 | |
| Hydraulic unit | Motor (kW) | 2.2×4P |
| Tank capacity (L) | 10 | |
| Machine dimensions (mm) | 817×1,450×1,709 | |
| Machine mass (kg) | 1,635 | |