Unit Dies for Press Machines
Unit Dies for the UNIT WORKER
Full Automatic High-speed High-accuracy Drilling and Cutting Available with H/I Beams 400 mm Wide and Square Hollow Sections or Angle Bars 200 mm Wide
Three drills can operate along two or three axes for simultaneous drilling as programmed and can finish drilling in the shortest possible time. Top and bottom faces of square hollow sections can be drilled through by one stroke. Marking is also available if necessary.
The ATC unit holding four kinds of tools executes a tool change automatically during machining operation. The machine's downtime for manual tool change can be reduced.
| Workpiece length (mm) | 2500 to 12500 | |
|---|---|---|
| Cutting (mm) | Square hollow sections | 50 sq. to 200 sq. |
| Angle bars | L50×50 to L200×200 | |
| C channels | [75×40 to [380×100 | |
| H/I beams | H100×50 to H400×200 | |
| Drilling diameter (mm) | φ9 to φ28 | |
| Workpiece length (mm) | 2500 to 12500 | |
|---|---|---|
| Cutting (mm) | Square hollow sections | 50 sq. to 200 sq. |
| Angle bars | L50×50 to L200×200 | |
| C channels | [75×40 to [380×100 | |
| H/I beams | H100×50 to H400×200 | |
| Drilling diameter (mm) | φ9 to φ32 | |