Unit Dies for Press Machines
Unit Dies for the UNIT WORKER
The stroke measurement function is added to eliminate the need for dog adjustment. Just input drill data.
The same program can be used by switching the base point among left, center and right for product front or tail end drilling pattern.
The workpiece is fixed and drilled with accuracy by moving the gantry equipped with three drill units.
Drilling diameter (mm) | φ14.0 to φ28.0 |
---|---|
Thickness (mm) | 4.5 to 35.0 |
H/I beams (mm) | H100×50 to H700×300 |
---|---|
C channels (mm) | [100×50 to [380×100 |
Angle bars (mm) | L100×100 to L250×250 |
Square hollow sections (mm) | □100 to □200 |